緊湊性德國IFM易福門帶有 IO-Link 的耐用速度傳感器

新型速度傳感器是速度監控的緊湊型解決方案，因為評估電子元件已集成于傳感器外殼中。速度限值通過電位計或 IO-Link 來設定，輸出功能會在達到此限值時開啟。可監控旋轉和線性運動的超速、速度過慢和堵塞情況。與其之前設備相比，此類新型傳感器擁有可用于齊平安裝的耐用金屬外殼。存在通過 ATEX 的特殊版本，適用于無須額外緊湊保護情形。Especially in the field of conveying technology the
compact speed sensors can be used for various applications,
for example for monitoring belt conveyors or
bucket elevators. Here they are typically used to monitor
underspeed, blockage or standstill.The speed sensors incorporate the complete speed
monitoring. The switch point can be set using a multiturn
potentiometer.尤其是在輸送機技術域，該緊湊型速度傳感器可用于多種應用范圍，例如用于監控帶式輸送機或斗式提升機。在此類應用中，它們通常用于監控速度過慢、堵塞或停止情況。
IO-Link provides additional functions such as remote
information about the current speed or the switch

緊湊性德國IFM易福門帶有 IO-Link 的耐用速度傳感器
point and the 速度傳感器包含全面的速度監控功能。開關點使用多圈電位計來設定。IO-Link 可提供多種追加功能，如有關當前速度或開關點的遠程信息、啟動延時時間等重要額外參數的配置。這樣便可以與控制器或 SMARTOBSERVER 進行直接通信configuration of important additional
parameters such as the start-up delay time.
This allows direct communication with the controller
or the SMARTOBSERVER.The integrated sensor is damped by passing cams or
other metallic targets. The evaluation unit determines
the period duration or the frequency (actual rotational
speed value) on the basis of the time interval between
damping and compares it to the set switch point
(preset value).
The output is switched during the start-up delay and
when the rotational speed exceeds the set switching
value.該集成式傳感器被經過的凸輪或其他金屬目標施加阻尼。評估設備基于阻尼之間的實踐間隔確定持續實踐或頻率（實際旋轉速度值），并將其與設定的開關點（預設值）進行比較。在啟動延時期間以及旋轉速度超過設定的開關值時，輸出功能開啟。LED 示意速度過慢以及輸出功能關閉。
An LED signals underspeed and switch-off of the